The sole in the shoes came off, it makes sense to repair. The sole peeled off under warranty. How to glue the sole on your own? Which glue to choose

14.07.2019

The peeled-off sole is a common problem that can be solved in two ways: contact a repair shop or stick the sole at home.

The second option is the most common, but at the same time the quality of gluing with the wrong choice of glue and the gluing method is “lame”.

In the article we will tell you which glue to choose for the pasted shoes and how to stick the sole to the bootso that it lasts as long as possible and does not come off before the end of the wearing season.

How to glue the sole

Manufacturers of shoes and shoe makers share adhesives for use for gluing soles, gluing stitching elements and for gluing insoles.

Glue for the sole after drying, it should have strength and elasticity, resistance to low and high temperatures, moisture resistant properties.

When choosing the composition, it is important to understand what materials the sole and the main part of the shoe are made of (information can be found on the sticker / stamp in the boot or on the shoe box).

Polychloroprene adhesive, also known as nairitic / neoprene, is created on the basis of chloroprene rubbers of low-temperature polymerization.

Suitable for bonding rubber, leather, fabric, wood and polymer parts.

Nairite glue for shoes is available in small tubes for home use, as well as in cans for industrial needs.

The best representatives for gluing the soles of shoes:

Nairit glue (88, Nairit-1, Nairit) - a common Russian adhesive composition, glues a lot of materials for which it is popular among masters. Many note the high quality of products in cans, however, the glue in the tube has earned bad fame.
Shoe glue Octopus.
Glue for shoes Marathon, moment.
KLEYBERG shoe glue for soles.
Glue shoe professional SAR 30E Kenda Farben .
Clay nairit BOTERM GTA, BOCHEM.

Chloroprene adhesive requires a proper bonding process with activation of the adhesive film by heating.

Polyurethane adhesive is made from urethane rubber mixed with an isocyanine hardener. Such glue is suitable for gluing the leather base of the shoe to the sole of leather, rubber, thermoplastic / TEP and polyvinyl chloride / PVC.

Best shoe glue:

Shoe glue Desmokoll / Desmokoll.
Uranus.
Polyurethane adhesive UR-600.
"Professional" glue.
Glue for shoes BONIKOL PUR, BOCHEM.
Glue polyurethane shoe SAR 306, Kenda Farben - a professional Italian composition for leather goods and shoes, withstands high loads and copes well with bonding natural and artificial leather, fabric, rubber and plastics.

For gluing the soles, proper surface preparation is required, as well as glue exposure to the moment of gluing.

How to glue the sole to the boot - instructions

For high-quality bonding of the sole with shoes, it is necessary to observe the technology of applying the adhesive composition.

When choosing a polyurethane or nairite composition, you can rely on this instruction, since both types of glue are applied using a similar technology.

Cleaning and degreasing the glued place - ordinary acetone is suitable.
For high-quality adhesion, the sole and the glued part of the shoe made of leather or a sneaker should be slightly sanded. Fabric and cardboard parts are not sanding.

We apply a thin layer of glue on both glued surfaces of the boot, without sticking, we withstand time in accordance with the manufacturer's instructions (time may vary) - an average of 5-15 minutes.
After drying the first layer of glue, apply the second and again wait for the formation of the adhesive film, the composition should not be fluid - about 10-15 minutes.

VIDEO INSTRUCTION

In order for the glue to glue the shoe sole qualitatively, it is necessary to create a thermal activation of the adhesive film, at home this can be done using a household or building hair dryer.

It is important that the heating temperature should correspond to the exposure time of warm air:

80-100 ° C for 30-90 seconds,
120-140 ° С 20-40 sec.

After heating, the sole is firmly pressed with high pressure to the shoe for 20 seconds. Further, the shoes must be left glued for a period of 24 to 48 hours.

Sooner or later, the shoes begin to leak, as the sole bursts or crackes. If you want the couple to serve for a long time, it is better to take the products to the workshop.

Home methods will help repair shoes only not for a long time. But if you want to fix the products yourself, we offer methods on how to glue the sole of shoes at home.

Before starting work, the sole must be cleaned, dried and degreased. For degreasing, use a special solution, gasoline or acetone. After processing, the product is dried again.

Pick up the load so that the shoes do not deform. The ideal block in the form of the letter G with additional weight. Keep the product under pressure for at least ten hours.

The adhesive composition is applied with a thickness of up to three mm, then it is held for ten minutes and only then the parts are glued together. Choose only high-quality and proven glue. A suitable option would be the classic moment glue, a polyurethane product or epoxy sealant. In addition, you can use special rubber glue for shoes or shoe glue.

According to experts, the best tool will be polyurethane adhesive due to strength and elasticity. It provides a secure fit and can repair shoes of any kind. In any case, these are toxic compounds, so ensure safety during work. If the product gets into the nose or eyes, rinse the mucous membranes immediately with running water.

Be careful when working, as the adhesive can spoil the product material, especially if it is suede shoes, leather or patent leather shoes. The glue is difficult to wash off. Now let's figure out what to do if the soles of the shoes crack.

How to glue the sole

First method

If the shoes are slightly sticky around the edges, you can patch the products with suitable glue. Clean and dry the products, degrease the surface so that the glue sticks better and provides a reliable connection. Then you need to apply the composition to the parts and leave for ten minutes, then glue the shoes and press down with the load.

Second method

To close the crack on the sole, step back five centimeters from the gap in the direction of the heel and draw a parallel line. The area from the line to the nose is cleaned with sandpaper along with a crack. Then you need to glue the gap with “Moment” glue and make a marking for the holes for the threads.

Remove the insoles from the shoes, grab the boot knife and cut out the small holes according to the marking. Then, through the resulting grooves, sew the material with strong threads. On top of each seam is covered with glue and left to dry. To clean the sole and degrease it again, then cover it with micropore and press it down.

Third method

Clean the crack inside and degrease. Trim the edges of the sole at the edges with a depth of one mm and indent five mm in each direction. Then make a patch of rubber in size with a margin.

A bicycle camera is suitable for making a patch. Peel the material with sandpaper and degrease, completely cover with glue on one side, leave the dry edges of five mm on the other.

Bend the cracked sole so that the break is revealed, and glue with glue. After it dries slightly, paste the rubber patch into the affected area and straighten it. Leave under load. The listed methods will help if the sole on the boots, shoes or shoes cracked.

Fourth method

You can seal the hole in the sole with silicone glue-sealant. You need to glue the products from the inside of the shoe under the insole. Carefully insert open glue into the hole and completely fill the hole with the composition.

Leave the products to dry under the press for the time specified in the sealant instructions. Close a large hole with a special horseshoe made of polyurethane and seal with thick glue. You can buy such a horseshoe in the shoe department or store.

Methods for sealing summer and winter shoes

Spring and autumn, demi-season and winter shoes are often characterized by a honeycomb or trellised sole design. If the sole has burst on such products, as well as with prolonged wear, it gradually wears out. Voids form inside, the heel may fail.

To restore such products, you must first remove the rubber that covers these cells. To do this, tear off the insole, carefully clean each hole from dirt, debris, cardboard residues and glue. Then empty cells are filled with small scraps of micropores and filled with silicone sealant.

Recovery continues when the sealant dries and hardens. Prepare new insoles, soak with sealant or glue, glue to the sole of the shoe and press with the weight for the time specified in the instructions for the adhesive.

For summer shoes, sneakers, sneakers and other light shoes, you can buy a separate thin rubber sole and glue the products with rubber glue. This method is suitable if the products have flat soles. When sticking rubber on leather shoes, first make an edge of 45 degrees.

In order for the rubber to firmly and permanently adhere to the polyurethane or kapron base of the shoe, first cut the size of the cotton fabric to size and weld it to the base with a hot iron. Then glue the new sole.

After repair, it is important to monitor the shoes and take care of the pair. Wash and dry products regularly. Which shoe cream is best to choose, see.

How to fix sports shoes

If sneakers or sneakers have worn off at the location of the socks, treat the damaged areas with sandpaper and degrease. Take rubber or polyurethane of different thicknesses and cut out the patch. A thicker material is applied to the site of damage, and a smaller one - to the normal sole.

Process the patch with sandpaper in the place where it adjoins the damaged area. Then cover the material with glue and press sneakers or sneakers to the sole. Keep under pressure for 24 hours.

If a hole is formed in the sole of a sneaker or sneaker, the edges of the hole must first be cleaned and degreased, then an adhesive applied. A fiberglass mesh (sickle) is inserted into a large hole.

No matter how high quality and expensive shoes you get, sooner or later it wears out and sometimes even breaks. Most people in this case resort to the help of a specialist. Some people prefer to save on repairs and solve the problem on their own. About 80% of all modern shoes are made using adhesive compounds. Glue is also used in the repair, which almost completely replaced the threads and cloves. Professionals say that adhesives currently provide the best and most reliable grip. Which shoe glue is the best is definitely hard to say. It depends on the type of product and the specific task.

Without experience, it is impossible to choose a suitable adhesive for shoes. Experts recommend resorting to the help of products only known brands. We list what advantages adhesives should have:

reliability and durability;
water resistance;
frost resistance;
the thickness of the bonding elements should not greatly affect the adhesion strength;
lack of rigidity;
the integrity of the adhesive materials;
elasticity of seams.

With these parameters, the glue will effectively cope with its task. From the whole variety of adhesives available on sale, we have identified the highest quality and most reliable. Helped us in this feedback from real users.

TOP 10 best shoe adhesives

10 Contact

Best price
A country: Russia (made in China)
Average price: 37 rub.
Rating (2019): 4.6

More than 10 years ago, the domestic company Rosel developed an excellent adhesive for shoes. In 2002, the range was represented only by instant adhesives, however, in 2008, contact and epoxy adhesives went on sale. Today, Contact is the second in the market in terms of sales, second only to the Moment. Moreover, the price of the first is much lower than the second.
Contact is suitable for bonding leather, rubber, ceramics, porcelain and many other materials. They can repair shoes very high quality. Glue perfectly fills cracks and gaps. Contact is 100% fulfilling its functions. When all the recommendations indicated on the package are followed, the substance glues “tightly”. Buyers speak about him only on the positive side.

9 eva

Economical consumption
Country: Taiwan
Average price: 100 rub.
Rating (2019): 4.6

Glue for Eva shoes fully justifies the characteristics declared by the manufacturer. Therefore, it deserves a place in our ranking. Consumers cannot find a single flaw. Glue "tightly" seals and corner, side cuts and tears in the bend. Keeps on the shoe for a very long time, keeping the damaged area from repeated damage.
Eva is water resistant. The sun does not flow. Even oblique cuts seals with a bang. Moreover, the place of cut after processing with glue is almost not noticeable. Buyers recommend “Eva” as the best glue that perfectly copes with its task, is used sparingly and is inexpensive. Shelf life is 2 years.

8 second

Most popular glue
Country: China
Average price: 85 rub.
Rating (2019): 4.7

One of the best-selling and best means for gluing shoes. Instantly "grabs" the necessary parts of the surface. The glue will not stain and will dry quickly. Shoe repair masters actively recommend Second to use. After application, shoes can be worn in various conditions without fear of new damage. The product is resistant to alkali, grease and moisture. It consists of polyurethane, acetone, methyl ethyl ketone and various additives. It has a helium consistency and a transparent color.

The tube is small and convenient, users note easy use and quick action. In addition, a ridiculous price suits all buyers. A second firmly sticks the sole for a long time. The effectiveness and versatility of glue pleases customers. After complete solidification, the product has no smell or color. It can also be used in various everyday tasks: to glue elements of the interior or to realize creative ideas. Despite all the above advantages, the Second has a negative side - uneconomical use and a characteristic smell.

7 Moment Marathon

Fast bonding
Country: Ireland
Average price: 149 rub.
Rating (2019): 4.7

Henkel has made glue specifically designed for shoes. Its main advantages are efficiency, economical consumption and ease of use. The gluing process is fast enough, which saves time. The tube contains only 3 grams of the substance, however, it lasts for a long time.
The glue is waterproof and elastic, and it also has high strength. Due to the consistency, it does not flow. This leads to ease of use. A special thin nozzle allows you to apply glue with precision to those areas where repairs are required, and it is easy to control the dosage. User reviews indicate the good quality of the “Moment”. They say that the glue does an excellent job not only with fixing shoes, but also with other repairs to leather products.

6 DoneDeal

Excellent adhesion to dissimilar surfaces
Country: USA
Average price: 185 rub.
Rating (2019): 4.8

Adhesive that is suitable for almost all materials. With it, you can seal air mattresses, boats, camping equipment, shoes, sports equipment and more. It combines things of heterogeneous origin - rubber with metal, plastic with wood, glass with leather. The tool perfectly tolerates a temperature difference and holds firmly at low and high rates - from -45 to +105 degrees. The sealant adheres to the sole or the upper part of the boots in the best way. Strong connection allows you to wear shoes for more than one season.

Apply glue on both surfaces. Then he quickly and reliably "grasps." A prerequisite is a thin layer. Within 24 hours, the consistency completely hardens and dries. Heating the glue to a temperature of 70-80 degrees will help speed up the process. Customer reviews are mostly positive. Note the convenient tube and easy use. In the column of flaws you can find comments about the pungent odor.

5 UHU SCHUH & LEDER

Durability of adhesive joints
Country: Germany
Average price: 167 rub.
Rating (2019): 4.8

A reliable tool for bonding hard and soft materials. After application, it dries quickly. One of the most significant advantages is the adhesive's resistance to moisture. If water gets in, it will not soften and will not lose its basic properties. Apply it most often for shoes. UHU SCHUH & LEDER does not dry out for a long time and holds firmly, even at extremely high temperatures - up to +125 degrees.

The main rules before use: it is imperative that the shoes are clean and dry. It is recommended to apply a thin layer, if necessary, several times until a barely noticeable film forms. Users note that the glue does not leave unwanted stains. In addition, it holds well glued surfaces of paper, leather and others. In addition to all of the above advantages, the tool has some shortcomings that can be found in reviews. The disadvantages include not the most convenient tube, as well as a sharp smell of glue.

4 Desmokol

High reliability
Country Russia
Average price: 175 rub.
Rating (2019): 4.8

Shoe glue that is praised for quality and reliability. The composition is based on polyurethane resins. Due to this, it quickly connects the surfaces of various materials and holds them firmly for a long period of time. Desmokol is subject to even the hard parts of shoes. Often, it is used to seal the upper part of the shoes or sole. Also, the tool is suitable for plastic, metal or glass. It has water repellent and ductility.

Before use, the product must be prepared for application. It is recommended to clean the shoes from dirt, remove the remnants of the old dried glue and degrease the desired part of the surface. It is very important to apply the product in a thin layer and wait about 10 minutes before drying. If necessary, the procedure should be repeated until a film is formed. Additional compression of the adhesive does not require it will be enough to firmly connect the desired parts. Buyers are satisfied with the purchase and are happy to advise this glue. Only bad smell is considered a minus.

3 Nairit 1 (88-P1)

Best strength
Country Russia
Average price: 299 rub.
Rating (2019): 4.9

One of the best adhesives for shoes is Nairit. Numerous customer reviews tell about its effectiveness. Due to the wide range of glued materials, Nairit can be used in various household fields. Adhesion strength depends on the technology of work and the specifics of the material.

In the course of work, Nairit forms a waterproof, elastic seam of high strength. If you need to process a large area - Nairit glue is an indispensable helper, since the layer applied by it remains sticky for a long time. The substance is safe to use. It does not contain any solvents of narcotic action, such as toluene. Glue can handle most materials in any combination. It can be leather, rubber, fabric, wood, and much more. Bonding methods are hot and cold. In the first version, the product can be used after 4 hours, in the second - in a day.

2 Polyurethane Seam Grip

It dries quickly. Securely sticks together
Country: USA
Average price: 780 rub.
Rating (2019): 4.9

Universal glue, which is mainly used for gluing leather, rubber, fiberglass, and is also suitable for repairing shoes. After use, the product dries quickly enough and becomes elastic, which allows it to not crack or crack. For uniform application, it is recommended to use a brush. Normally, leave the product to dry for a period of 12 hours. Then it firmly glues the necessary details.

This tool has earned many positive comments in the reviews. This is due to the fact that it performs its function efficiently and is easy to apply. Seam Grip will allow you to glue the damaged worn out sole and return the boots to a presentable appearance. The glue is waterproof, after drying, you can safely walk in the rain and not be afraid of the appearance of new damage. Shoe repair masters actively recommend the purchase of Seam Grip. The only thing that can scare off a high price.

1 KENDA Farben SAR 30E

The best quality
Country: Italy
Average price: 500 rub.
Rating (2019): 5.0

Italian manufacturers have developed the highest quality glue. Today it is used in shoe production and leaves only the best impressions about itself. It is mainly intended for gluing leather materials with any other types of them. It also shows its properties when applied to wood, glass and other surfaces. Long-term fixation of parts is not required - the glue "grabs" the necessary parts in a few minutes. Use should be at a temperature not lower than + 17 degrees.

Degreasing and surface cleaning are recommended before use. The product is applied in 2-3 layers at intervals of time for 10 minutes. Shoes will be ready to wear after 4 hours, provided that the product is heated to a temperature of 90 degrees. KENDA Farben SAR 30E is resistant to cold and heat, and also holds well when water gets in. Buyers note that the glue does not have a pronounced smell, which is a definite plus. And the minus they consider the high cost.

Well, which of us has not encountered such a problem as a cracked sole? The situation is very unpleasant, because not everyone knows how to glue the sole on sneakers or on any other shoes. It can be attributed to the master, but it will cost a lot, then the thought comes to mind to independently solve this problem. To do this, you must be aware of some of the nuances that are discussed in this article.

How to glue the soles of autumn or winter shoes?

In the role of improvised means, to do the repair of the sole of the sneaker will do:

glue, for example, “Moment”;
epoxy sealant “Crazy hands”;
means with Desmokol polyurethane.

Each of them is accompanied by instructions that you need to focus on while working.

Important! You must also consider that these funds are somewhat toxic. If any of them enters the mucous membranes, they must be immediately washed off with a stream of ordinary running water.

Work sequence:

Since winter or autumn shoes often have soles of a honeycomb structure, for starters you will have to deal with honeycombs. The rubber that covers them, you must remove to such an area that will remove absolutely all accumulated dirt from the holes. It happens that access to the honeycombs occurs from the side of the insole, which will have to be completely and completely eliminated during the cleaning of the holes.
Cover the honeycombs with small scraps of micropores, and then fill with silicone sealant, carefully sealing.
Before you start sealing up a cracked sole, you will have to wait for the sealant to dry and harden.
Next, cut a piece of rubber or micropore, which can fit into the hole if it is bulky, or press out small holes with a mixture of sealant and micropore sawdust.
According to the size of the shoes, cut the sole out of a thin piece of rubber, glue with the help of already prepared adhesive throughout the entire area of \u200b\u200byour shoe.
Put shoes or boots under the press.

Important! The time it takes for the glue to completely dry is indicated in the instructions for it.

So that negative factors do not lead to the fact that shoes or boots quickly stick up and lose their strength, read also about:

How to seal a hole in the sole of summer shoes?

It is necessary to act according to exactly the same algorithm, but the trouble is somewhat less.

In the event that the sandals are glue, then get a rubber sole in a professional workshop and glue it on your own using rubber glue. This can be done if the shoes have a solid base.

Important! If the sole is attached to the summer shoes exclusively along the contour, in this case you will have to throw out the sandals.

We repair sports shoes

In the event that the training process takes place in the gym, you will not have to give up your favorite pair of sneakers. Of the domestic types of glue, it is best to use epoxy, which is designed specifically for shoes. Its cost is relatively low.

Imported Adhesive:

The most suitable type of adhesive is Seamgrip. With it, rubber boats are sealed. If you managed to get it, you won’t have to part with your favorite pair of sneakers for a long time, because this is the only glue that completely solves the problem of how to glue the sole of the sneakers. But its cost is quite high.
Imported epoxy adhesives of the Done Deal type are slightly better than domestic adhesives, but the durability of the sneakers when using them can not be promised.

How to act to seal the sole on the sneakers:

Thoroughly strip the edges of the holes in your sole and degrease with a solvent.
When everything dries, apply a properly diluted epoxy mixture.
In the event that the hole is large, put a fiberglass net called a sickle in it.
While the glue is drying, seal the hole outside with masking tape so that the sole remains completely flat.

Tread Repair

To repair the tread, you need a sharp knife - it is best to take a shoe, coarse-grained sandpaper or a grater, which is made of a piece of tin from any can with holes punched in it.

Repair is as follows:

To begin, cut a patch from a piece of sufficiently hard rubber and adjust it in place.
Using a grater and knife, give the patch a wedge-shaped shape.
The surface should be rough, so it is better to treat it with sandpaper, and then wipe with a solvent for degreasing and dry.
After that, apply glue to the surface in two or three layers. Dry the glue thoroughly. Drying time of the first of the layers is approximately 20 minutes, of the second - at least 2 hours, but better not less than 6-8 hours.
Then heat the glued surfaces over an electric stove or gas until the glue smells, quickly attach them to each other, firmly press and hold in for several seconds until they are completely cooled.

Sneaker repair heel

In the event that the tread is thoroughly worn out, carefully tear it off the surface of the sole, cutting it in precisely those places where it is impossible to tear off. You can moisten these places with a solvent so that the tread peels off.

Transfer the contour of your sole to the cardboard, finish the erased edges, and then cut out the pattern. You can make a new tread from any rubber mat found in any hardware stores.

Important! During bonding, thoroughly clean the surfaces to be bonded, but otherwise, the bonding technology itself is the same.

We repair a soft sole

If you have a soft sole stuck, then before sticking a new tread, increase the soft sole to the required thickness using microporous rubber.

Shoe upper repair

During the repair of the top of a shoe, a lot depends directly on its material. In the event that the top is made of genuine or artificial leather or suede, then they crack in the fold or simply wiped.

Glue or crack patches on cracked, as well as burnt places, from much thinner and more elastic than the top material, for example, from suede or artificial leather.

Important! But better not cracking. To do this, lubricate genuine leather with shoe polish, clean suede with a dry, hard brush, and also with school washing gum, try to raise the pile.

In order to clean natural leather and suede from dirt, it is better to use a slightly damp cloth and under no circumstances wash them with running water. By the way, try not to wear shoes that are made of artificial leather during sub-zero temperatures.

How to sew on patches?

At those moments when the threads are torn, which fasten the details of the sneakers, the layer of threads is restored using the old holes. You can use a paper clip to pull the threads, but it is best to use the needle from the syringe by slightly dulling its tip on the emery so that the needle cannot cut the thread.

Important! Remember that the care of shoes, sneakers, boots and sandals should be correct even in the season when you do not wear them. This will be the key to strength and durability of both the upper and the sole. Save to your bookmarks and use ours if necessary.

Use for repair polyurethane adhesive

the store.

Watch more video tutorials:

How to glue the sole

the sole is unsticked, the sole has come off, the sole has fallen off, the sole has come unstuck, shoe repair, how to glue, glue the sole, how to glue, glue shoes, how to glue hot, shoe glue

"Sole sizing" is not an entertaining video, but an educational one.

Be careful about what it says. I have shown the principle. I want to add some very important tips:

1. glue the shoes "dear to your heart" only after you try a couple of times on the old, unnecessary. glue the neighbor-grandmother, among the elderly, as a rule, shoes are not expensive, the main thing for them is not to leak or fall off, you will practice and grandmother is pleased.

2. If you are not too lazy, grease - dry, and then again grease - dry (ie apply a double layer of glue), then the hitch will be much stronger. this is especially true for textile, suede shoes, since these and other porous materials absorb glue well and on the surface to be glued there is less of it, for this a second layer is needed. only after each smear, be sure to let the glue dry (grab) - this is with hot sizing.

3. How to glue on the "cold", you all know. We missed both sides, let the glue dry for about 10 minutes, so that the missed parts did not touch and pressed in the “grandmother's way”, i.e. leg of a sofa or table .

Use for repair polyurethane adhesivefor Desmokol shoes and its varieties.

How to glue the sole at home

Buy it in stores "all for repair and sewing shoes." It is sold for bottling, a half liter will cost you no more than 150 rub .. This is glue for everything, the main thing is to be able to use it. An irreplaceable thing in the household, and such an operation as shoe repair with your own hands will be quite feasible for you.

My advice, learn to glue "hot method". When you learn this and that, you will decide for yourself where which method to apply. Glue can be bought on the website in the store. It will cost more than a spill, but without searches and proven. Glues almost all materials

Watch more video tutorials:

peeled off peeled off peeled off the sole

shoe repair how to glue glue the sole

how to glue glue shoes how to glue hot method

How to glue the sole

the sole is unsticked, the sole has come off, the sole has fallen off, the sole has come unstuck, shoe repair, how to glue, glue the sole, how to glue, glue shoes, how to glue hot, shoe glue

"Sole sizing" is not an entertaining video, but an educational one. Be careful about what it says. I have shown the principle. I want to add some very important tips:

Use for repair polyurethane adhesivefor Desmokol shoes and its varieties. Buy it in stores "all for repair and sewing shoes." It is sold for bottling, a half liter will cost you no more than 150 rub .. This is glue for everything, the main thing is to be able to use it. An irreplaceable thing in the household, and such an operation as shoe repair with your own hands will be quite feasible for you.

My advice, learn to glue "hot method".

What glue is better to glue the sole of the shoe

When you learn this and that, you will decide for yourself where which method to apply. Glue can be bought on the website in the store. It will cost more than a spill, but without searches and proven. Glues almost all materials

Watch more video tutorials:

peeled off peeled off peeled off the sole

shoe repair how to glue glue the sole

how to glue glue shoes how to glue hot method

Glue for shoes. DIY shoe repair

Details Updated 11/05/2017 22:36

Shoe repair is not as scary as it seems.

Shoe repair is a familiar situation for most of us. Fortunately, usually only shoe glue and skillful hands are needed to rectify the situation.

Problems with shoes? Take it easy.

If there are problems with the shoe, there are only three options: throw the shoes out, hand them in for repair and repair them yourself. It is clear that it is quite difficult to replace a broken heel or a leaky sole itself, because few people have the right materials at hand, and knowledge is required quite specific. However, gluing a lagging sole is not as difficult as it seems at first glance.

Classic shoe glue instruction manual

The surfaces to be glued must be washed thoroughly, scrubbed with sandpaper, degreased with acetone or gasoline, wiped with a dry cloth. After this, apply evenly. glue for shoes on both cleaned surfaces and wait 10-15 minutes. If the materials are absorbent and porous, once again apply a layer of glue to the surface and let stand for about 10 minutes. The glued surfaces must be pressed firmly for a short time. Usually the most important thing here is compression force, not its duration at all. However, there are exceptions for which instructions are drawn up. This is the standard way that you should focus on. However, when repairing shoes, you should always carefully read the instructions, and not rely on your knowledge. The longest period for reliable bonding of surfaces is one day. Usually a few hours is enough. Watch the video “How to glue shoes”

Choosing glue for fixing shoes

How to choose the right one glue for shoes? This is a pretty serious question, because manufacturers today produce many varieties of shoe glue, and about half of them have the word "universal". This is far from true, because each of them has certain characteristics. It’s extremely rare that good glue for metal will be just as good for shoes. For example, “Moment” universal glue should not be used for shoes. It adheres perfectly to any surface, only the surface of the sole will crack quickly. After solidification, it becomes “glass”, breaking the sole.

The main types of shoe glue

The most common types of glue for shoes are rubber, epoxy, polyurethane, PVC, “super-glue”, “Moment” and several others. The main thing is to carefully watch that the inscription " for shoes". Each of them has its own advantages and disadvantages, which should be remembered. I will give two varieties as an example.

Rubber glue for shoes

Natural rubber glue provides an interesting opportunity to glue without activating the adhesive film, but its adhesive ability is quite low. There are other disadvantages. Nevertheless, for secondary and auxiliary operations (gluing insoles, preliminary mounting of the sole), it is quite suitable.

Polyurethane adhesive for shoes

Polyurethane glue is excellent in cases where other types of shoe glue are not able to provide the proper fastening of parts.

How to glue the sole on your own? Which glue to choose?

For example - heavily greased leathers or compound parts with polyurethane and polychloride coating.

Self-repairing shoes is not so difficult. Other types of glue are more versatile and are great in most cases. In a word, if you take shoe repair responsibly, but without too much reverence, it will be possible to significantly extend the life of your shoes. In the vast majority of cases, repair does not require special skills and knowledge. It is enough only attentiveness and minimal skills to work with hands.

How to glue sneakers?

The most comfortable and versatile shoes are sneakers.

How and how to glue the sole to the boot?

When buying even expensive shoes, the situation is not ruled out that during operation, the sneakers begin to leak, deform, and eventually wear and tear. If they are expensive for you or you have a lot to do with them, then of course it will be a pity to throw away your favorite shoes. Do not worry, in this article we will show you how to glue the sneakers, because the simplest and most affordable way to repair is to use glue for shoes.

How to choose glue for shoe repair?

To date, effective adhesive compositions for shoes have almost completely replaced traditional fasteners, such as threads and nails. In the production of 80% of modern shoes also use different adhesive compositions.

To tighten the blanks of the upper part, polychloroprene, polyurethane compositions are used in the form of aqueous dispersions of polymers, rubber latexes. The main advantages of such formulations:

lack of integrity violations of materials joined with glue;
durability and reliability of adhesive joints;
elasticity of adhesive joints;
water resistance, frost resistance;
the bonding strength is independent of the thickness of the part.

In shoe production, the following types of products are most in demand:

Nairite glue. It is mainly used for attaching soles and rubber heels, tightening workpieces of the upper part of the product, as well as for attaching elastic toes. Advantages: water resistance, creates a durable seam, glues almost all materials (leather, synthetics, rubber), fast bonding. The disadvantage is that it does not work if you need to fasten the top and the sole of polyurethane. Given these properties, it is perfect for solving the problem of how to glue sneakers.
Polyurethane. They grease the workpieces and glue the soles. Advantages: fastening strength, hardens quickly, reliably fastens porous surfaces. It glues such materials well: textiles, leather, rubber, synthetics. The most popular shoe shoe is Desmacol.
Polyvinyl chloride. This composition is used for textile and leather insoles, braid. Advantages: elasticity, well fastens textile layers, leather details, suitable in order to cope with the task of gluing sneakers.
Rubber glue. This composition is used for bonding insoles and rubber soles. Most suitable for repairing summer shoes. The disadvantage is that it does not provide resistance to moisture and frost;
Combined adhesive. Used for attaching rubber soles, as well as for covering the edges of the workpiece. It is used for construction and adhesive fastening. They are used for sealing joints and welts.

Which glue is better?

Experts consider Eva glue to be one of the best adhesive compositions for working with shoes. Advantages of this composition:

hypoallergenicity;
elasticity;
ease;
moisture resistance;
transparency when drying.

The disadvantage is not suitable for working with PVC.

Important! Carefully read the instructions on the packaging of the adhesive to determine what materials and purposes it is intended. If necessary, consult the seller.

If you decide to do your own repair of sneakers, then you need to get a good glue.

The most common brands of glue

Sneaker Repair Instructions

Before sticking sneakers, wash them and determine the damage. Then:

Degrease the surfaces to be bonded with alcohol or acetone.
Dry the surface with a clean cloth.
Apply shoe repair glue with a layer of 2-3 mm. Depending on the brand, two layers may be required.
Allow the glue to dry (10 minutes).
Squeeze the mating surfaces with a load. Use a rubber bandage to wrap shoes.
Leave glued shoes for a day. Glue hardening period from 3 to 10 hours.
Remove excess glue.

A defect in a cracked sole or worn out heel of a shoe can be repaired with a piece of thin rubber. In this case, use only extra strong shoe glue.

Important! Perform all repairs in a well-ventilated area.

If high-quality shoe repair is difficult enough to make at home, it is better to contact experienced craftsmen.

How to store shoe glue?

The remaining adhesive for shoe repair can be stored until the following cases. Stick to some tips:

Store the adhesive in a dark, cool place, but not in the refrigerator to prevent condensation.
Keep the tube upright.
Stick on the tube a sticker with the date of opening, so as not to forget to update on time.
Wipe the tip of the tube with a lint-free cloth to extend the life of the glue.
After use, tighten the cap tightly.
When storing, adhere to temperature conditions, as well as humidity. Optimal conditions - 22-24C, 50-60% humidity.

Important! Carefully read the storage instructions for your brand of adhesive.

We hope that the tips you receive will help repair your favorite sneakers, and they will serve you in any conditions for a long time to come.

How to repair the sole of the shoe with your own hands

It is not easy to deal with complex shoe repair on your own without special skills and knowledge. It is better to entrust this work to a good shoemaker. But everyone can cope with the task of sticking the sole of a shoe or a leaky sneaker. This will not require any special means and devices, nor special efforts.

Read this article:

Winter shoe sole restoration

Usually, for the restoration of small damages on the sole of shoes at home, adhesive materials that are quite affordable are used. This is an epoxy sealant. Crazy hands, universal adhesive. Moment, polyurethane adhesive Desmokol.

Procedure

Since in most models of winter shoes the sole has a honeycomb design, honeycombs are processed first. The rubber covering the membrane layer is removed and all holes are thoroughly cleaned of accumulated dirt.
After cleaning, the honeycomb is filled with microporous material cut into small pieces, compacted well, and filled with silicone sealant.
The next stage of the restoration of the sole proceed only after the final hardening of the sealing composition.
If the crack on the sole is small, it is simply pressed in with a mixture of silicone sealant and micropore pieces, which was used to fill the honeycomb.
To repair bulk damage and deep cracks, cut a piece of micropore or elastic rubber of such a size that it completely fills the hole in the sole.
A "insole" is cut out of dense rubber, exactly matching the shape and size of the sole of the shoe.
Glue the blank over the entire area using a pre-selected adhesive.

This completes the shoe repair. It remains only to put the shoes under the press and wait for the glue to dry. It is impossible to say exactly how much is required for this time. You need to focus on the data in the instructions for the adhesive. On average, it takes 10-12 hours to dry.

Sneaker Repair

Sports shoes should be repaired best with epoxy glue or Seamgrip (USA) designed specifically for this purpose.

How to glue the sole on sneakers? To begin with, all surfaces to be treated must be cleaned of dirt and degreased with an alcohol-containing liquid, solvent.

If the damage is voluminous, the hole must be filled with a sickle (fiberglass mesh). Then dilute the epoxy glue, as stated in the instructions, and apply in a thin even layer (no more than 3 mm) to a crack or hole.

The adhesive will dry for several hours. At this time, it is recommended to close the crack on the outside with masking tape.

So the sole will remain flat and not deformed.

If the sole of the shoe is cracked in half, then stick it on your own do not even think. It will require complex repairs, possibly a multi-stage restoration or a complete replacement of a damaged shoe part. At home, this work is impossible. It is better to immediately take the shoes to the shoe shop.

Each adhesive is accompanied by an instruction that clearly explains each stage of the work. Before you repair the sole of winter shoes with your own hands, you need to carefully read the instructions, paying special attention to safety precautions.

The fact is that such products contain toxic substances. Therefore, it is undesirable to inhale their vapor, and if glue gets on the mucous membranes (eyes, mouth, nose), immediately rinse the skin with plenty of running water.