Garage 

The sole on the shoes comes off what to do. What to do if the sole on the shoe is cracked. Methods for sealing summer and winter shoes

Sooner or later, the shoes begin to leak, as the sole bursts or crackes. If you want the couple to serve for a long time, it is better to take the products to the workshop.

Home methods will help repair shoes only not for a long time. But if you want to fix the products yourself, we offer methods on how to glue the sole of shoes at home.

Before starting work, the sole must be cleaned, dried and degreased. For degreasing, use a special solution, gasoline or acetone. After processing, the product is dried again.

Pick up the load so that the shoes do not deform. The ideal block in the form of the letter G with additional weight. Keep the product under pressure for at least ten hours.

The adhesive composition is applied with a thickness of up to three mm, then it is held for ten minutes and only then the parts are glued together. Choose only high-quality and proven glue. A suitable option would be the classic moment glue, a polyurethane product or epoxy sealant. In addition, you can use special rubber glue for shoes or shoe glue.

According to experts, the best tool will be polyurethane adhesive due to strength and elasticity. It provides a secure fit and can repair shoes of any kind. In any case, these are toxic compounds, so ensure safety during work. If the product gets into the nose or eyes, rinse the mucous membranes immediately with running water.

Be careful when working, as the adhesive can spoil the product material, especially if it is suede shoes, leather or patent leather shoes. The glue is difficult to wash off. Now let's figure out what to do if the soles of the shoes crack.

How to glue the sole

  • First method

If the shoes are slightly sticky around the edges, you can patch the products with suitable glue. Clean and dry the products, degrease the surface so that the glue sticks better and provides a reliable connection. Then you need to apply the composition to the parts and leave for ten minutes, then glue the shoes and press down with the load.

  • Second method

To close the crack on the sole, step back five centimeters from the gap in the direction of the heel and draw a parallel line. The area from the line to the nose is cleaned with sandpaper along with a crack. Then you need to glue the gap with “Moment” glue and make a marking for the holes for the threads.

Remove the insoles from the shoes, grab the boot knife and cut out the small holes according to the marking. Then, through the resulting grooves, sew the material with strong threads. On top of each seam is covered with glue and left to dry. To clean the sole and degrease it again, then cover it with micropore and press it down.

  • Third method

Clean the crack inside and degrease. Trim the edges of the sole at the edges with a depth of one mm and indent five mm in each direction. Then make a patch of rubber in size with a margin.

A bicycle camera is suitable for making a patch. Peel the material with sandpaper and degrease, completely cover with glue on one side, leave the dry edges of five mm on the other.

Bend the cracked sole so that the break is revealed, and glue with glue. After it dries slightly, paste the rubber patch into the affected area and straighten it. Leave under load. The listed methods will help if the sole on the boots, shoes or shoes cracked.

  • Fourth method

You can seal the hole in the sole with silicone glue-sealant. You need to glue the products from the inside of the shoe under the insole. Carefully insert open glue into the hole and completely fill the hole with the composition.

Leave the products to dry under the press for the time specified in the sealant instructions. Close a large hole with a special horseshoe made of polyurethane and seal with thick glue. You can buy such a horseshoe in the shoe department or store.

Methods for sealing summer and winter shoes

Spring and autumn, demi-season and winter shoes are often characterized by a honeycomb or trellised sole design. If the sole has burst on such products, as well as with prolonged wear, it gradually wears out. Voids form inside, the heel may fail.

To restore such products, you must first remove the rubber that covers these cells. To do this, tear off the insole, carefully clean each hole from dirt, debris, cardboard residues and glue. Then empty cells are filled with small scraps of micropores and filled with silicone sealant.

Recovery continues when the sealant dries and hardens. Prepare new insoles, soak with sealant or glue, glue to the sole of the shoe and press with the weight for the time specified in the instructions for the adhesive.

For summer shoes, sneakers, sneakers and other light shoes, you can buy a separate thin rubber sole and glue the products with rubber glue. This method is suitable if the products have flat soles. When sticking rubber on leather shoes, first make an edge of 45 degrees.

In order for the rubber to firmly and permanently adhere to the polyurethane or kapron base of the shoe, first cut the size of the cotton fabric to size and weld it to the base with a hot iron. Then glue the new sole.

After repair, it is important to monitor the shoes and take care of the pair. Wash and dry products regularly. Which shoe cream is best to choose, see.

How to fix sports shoes

If sneakers or sneakers have worn off at the location of the socks, treat the damaged areas with sandpaper and degrease. Take rubber or polyurethane of different thicknesses and cut out the patch. A thicker material is applied to the site of damage, and a smaller one - to the normal sole.

Process the patch with sandpaper in the place where it adjoins the damaged area. Then cover the material with glue and press sneakers or sneakers to the sole. Keep under pressure for 24 hours.

If a hole is formed in the sole of a sneaker or sneaker, the edges of the hole must first be cleaned and degreased, then an adhesive applied. A fiberglass mesh (sickle) is inserted into a large hole.


No matter how high quality and expensive shoes you get, sooner or later it wears out and sometimes even breaks. Most people in this case resort to the help of a specialist. Some people prefer to save on repairs and solve the problem on their own. About 80% of all modern shoes are made using adhesive compounds. Glue is also used in the repair, which almost completely replaced the threads and cloves. Professionals say that adhesives currently provide the best and most reliable grip. Which shoe glue is the best is definitely hard to say. It depends on the type of product and the specific task.

Without experience, it is impossible to choose a suitable adhesive for shoes. Experts recommend resorting to the help of products only known brands. We list what advantages adhesives should have:

  • reliability and durability;
  • water resistance;
  • frost resistance;
  • the thickness of the bonding elements should not greatly affect the adhesion strength;
  • lack of rigidity;
  • the integrity of the adhesive materials;
  • elasticity of seams.

With these parameters, the glue will effectively cope with its task. From the whole variety of adhesives available on sale, we have identified the highest quality and most reliable. Helped us in this feedback from real users.

TOP 10 best shoe adhesives

10 Contact

Best price
A country: Russia (made in China)
Average price: 37 rub.
Rating (2019): 4.6

More than 10 years ago, the domestic company Rosel developed an excellent adhesive for shoes. In 2002, the range was represented only by instant adhesives, however, in 2008, contact and epoxy adhesives went on sale. Today, Contact is the second in the market in terms of sales, second only to the Moment. Moreover, the price of the first is much lower than the second.
Contact is suitable for bonding leather, rubber, ceramics, porcelain and many other materials. They can repair shoes very high quality. Glue perfectly fills cracks and gaps. Contact is 100% fulfilling its functions. When all the recommendations indicated on the package are followed, the substance glues “tightly”. Buyers speak about him only on the positive side.

9 eva

Economical consumption
Country: Taiwan
Average price: 100 rub.
Rating (2019): 4.6

Glue for Eva shoes fully justifies the characteristics declared by the manufacturer. Therefore, it deserves a place in our ranking. Consumers cannot find a single flaw. Glue "tightly" seals and corner, side cuts and tears in the bend. Keeps on the shoe for a very long time, keeping the damaged area from repeated damage.
Eva is water resistant. The sun does not flow. Even oblique cuts seals with a bang. Moreover, the place of cut after processing with glue is almost not noticeable. Buyers recommend “Eva” as the best glue that perfectly copes with its task, is used sparingly and is inexpensive. Shelf life is 2 years.

8 second

Most popular glue
Country: China
Average price: 85 rub.
Rating (2019): 4.7

One of the best-selling and best means for gluing shoes. Instantly “seizes” the necessary parts of the surface. The glue will not stain and will dry quickly. Shoe repair masters actively recommend Second to use. After application, shoes can be worn in various conditions without fear of new damage. The product is resistant to alkali, grease and moisture. It consists of polyurethane, acetone, methyl ethyl ketone and various additives. It has a helium consistency and a transparent color.

The tube is small and convenient, users note easy use and quick action. In addition, a ridiculous price suits all buyers. A second firmly sticks the sole for a long time. The effectiveness and versatility of glue pleases customers. After complete solidification, the product has no smell or color. It can also be used in various everyday tasks: to glue elements of the interior or to realize creative ideas. Despite all the above advantages, the Second has a negative side - uneconomical use and a characteristic smell.

7 Moment Marathon

Fast bonding
Country: Ireland
Average price: 149 rub.
Rating (2019): 4.7

Henkel has made glue specifically designed for shoes. Its main advantages are efficiency, economical consumption and ease of use. The gluing process is fast enough, which saves time. The tube contains only 3 grams of the substance, however, it lasts for a long time.
The glue is waterproof and elastic, and it also has high strength. Due to the consistency, it does not flow. This leads to ease of use. A special thin nozzle allows you to apply glue with precision to those areas where repairs are required, and it is easy to control the dosage. User reviews indicate the good quality of the “Moment”. They say that the glue does an excellent job not only with fixing shoes, but also with other repairs to leather products.

6 DoneDeal

Excellent adhesion to dissimilar surfaces
Country: USA
Average price: 185 rub.
Rating (2019): 4.8

Adhesive that is suitable for almost all materials. With it, you can seal air mattresses, boats, camping equipment, shoes, sports equipment and more. It combines things of heterogeneous origin - rubber with metal, plastic with wood, glass with leather. The tool perfectly tolerates a temperature difference and holds firmly at low and high rates - from -45 to +105 degrees. The sealant adheres to the sole or the upper part of the boots in the best way. Strong connection allows you to wear shoes for more than one season.

Apply glue on both surfaces. Then he quickly and reliably "grasps." A prerequisite is a thin layer. Within 24 hours, the consistency completely hardens and dries. Heating the glue to a temperature of 70-80 degrees will help speed up the process. Customer reviews are mostly positive. Note the convenient tube and easy use. In the column of flaws you can find comments about the pungent odor.

5 UHU SCHUH & LEDER

Durability of adhesive joints
Country: Germany
Average price: 167 rub.
Rating (2019): 4.8

A reliable tool for bonding hard and soft materials. After application, it dries quickly. One of the most significant advantages is the adhesive's resistance to moisture. If water gets in, it will not soften and will not lose its basic properties. Apply it most often for shoes. UHU SCHUH & LEDER does not dry out for a long time and holds firmly, even at extremely high temperatures - up to +125 degrees.

The main rules before use: it is imperative that the shoes are clean and dry. It is recommended to apply a thin layer, if necessary, several times until a barely noticeable film forms. Users note that the glue does not leave unwanted stains. In addition, it holds well glued surfaces of paper, leather and others. In addition to all of the above advantages, the tool has some shortcomings that can be found in reviews. The disadvantages include not the most convenient tube, as well as a sharp smell of glue.

4 Desmokol

High reliability
Country Russia
Average price: 175 rub.
Rating (2019): 4.8

Shoe glue that is praised for quality and reliability. The composition is based on polyurethane resins. Due to this, it quickly connects the surfaces of various materials and holds them firmly for a long period of time. Desmokol is subject to even the hard parts of shoes. Often, it is used to seal the upper part of the shoes or sole. Also, the tool is suitable for plastic, metal or glass. It has water repellent and ductility.

Before use, the product must be prepared for application. It is recommended to clean the shoes from dirt, remove the remnants of the old dried glue and degrease the desired part of the surface. It is very important to apply the product in a thin layer and wait about 10 minutes before drying. If necessary, the procedure should be repeated until a film is formed. Additional compression of the adhesive does not require it will be enough to firmly connect the desired parts. Buyers are satisfied with the purchase and are happy to advise this glue. Only bad smell is considered a minus.

3 Nairit 1 (88-P1)

Best strength
Country Russia
Average price: 299 rub.
Rating (2019): 4.9

One of the best adhesives for shoes is Nairit. Numerous customer reviews tell about its effectiveness. Due to the wide range of glued materials, Nairit can be used in various household fields. Adhesion strength depends on the technology of work and the specifics of the material.

In the course of work, Nairit forms a waterproof, elastic seam of high strength. If you need to process a large area - Nairit glue is an indispensable helper, since the layer applied by it remains sticky for a long time. The substance is safe to use. It does not contain any solvents of narcotic action, such as toluene. Glue can handle most materials in any combination. It can be leather, rubber, fabric, wood, and much more. Bonding methods are hot and cold. In the first version, the product can be used after 4 hours, in the second - in a day.

2 Polyurethane Seam Grip

It dries quickly. Securely sticks together
Country: USA
Average price: 780 rub.
Rating (2019): 4.9

Universal glue, which is mainly used for gluing leather, rubber, fiberglass, and is also suitable for repairing shoes. After use, the product dries quickly enough and becomes elastic, which allows it to not crack or crack. For uniform application, it is recommended to use a brush. Normally, leave the product to dry for a period of 12 hours. Then it firmly glues the necessary details.

This tool has earned many positive comments in the reviews. This is due to the fact that it performs its function efficiently and is easy to apply. Seam Grip will allow you to glue the damaged worn out sole and return the boots to a presentable appearance. The glue is waterproof, after drying, you can safely walk in the rain and not be afraid of the appearance of new damage. Shoe repair masters actively recommend the purchase of Seam Grip. The only thing that can scare off a high price.

1 KENDA Farben SAR 30E

Best quality
Country: Italy
Average price: 500 rub.
Rating (2019): 5.0

Italian manufacturers have developed the highest quality glue. Today it is used in shoe production and leaves only the best impressions about itself. It is mainly intended for gluing leather materials with any other types of them. It also shows its properties when applied to wood, glass and other surfaces. Long-term fixation of parts is not required - the glue "grabs" the necessary parts in a few minutes. Use should be at a temperature not lower than + 17 degrees.

Degreasing and surface cleaning are recommended before use. The product is applied in 2-3 layers at intervals of time for 10 minutes. Shoes will be ready to wear after 4 hours, provided that the product is heated to a temperature of 90 degrees. KENDA Farben SAR 30E is resistant to cold and heat, and also holds well when water gets in. Buyers note that the glue does not have a pronounced smell, which is a definite plus. And the minus they consider the high cost.


The peeled-off sole is a common problem that can be solved in two ways: contact a repair shop or stick the sole at home.

The second option is the most common, but at the same time the quality of gluing with the wrong choice of glue and the gluing method is “lame”.

In the article we will tell you which glue to choose for the pasted shoes and how to stick the sole to the bootso that it lasts as long as possible and does not come off before the end of the wearing season.

How to glue the sole

Manufacturers of shoes and shoe makers share adhesives for use for gluing soles, gluing stitching elements and for gluing insoles.

Glue for the sole   after drying, it should have strength and elasticity, resistance to low and high temperatures, moisture resistant properties.

When choosing the composition, it is important to understand what materials the sole and the main part of the shoe are made of (information can be found on the sticker / stamp in the boot or on the shoe box).

  • Polychloroprene adhesive, also known as nairitic / neoprene, is created on the basis of chloroprene rubbers of low-temperature polymerization.

Suitable for bonding rubber, leather, fabric, wood and polymer parts.

Nairite glue for shoes is available in small tubes for home use, as well as in cans for industrial needs.

The best representatives for gluing the soles of shoes:

  1. Nairit glue (88, Nairit-1, Nairit)   - a common Russian adhesive composition, glues a lot of materials for which it is popular among masters. Many note the high quality of products in cans, however, the glue in the tube has earned bad fame.
  2. Shoe glue Octopus.
  3. Glue for shoes Marathon, moment.
  4. KLEYBERG shoe glue for soles.
  5. Glue shoe professional SAR 30E Kenda Farben .
  6. Clay nairit BOTERM GTA, BOCHEM.

Chloroprene adhesive requires a proper bonding process with activation of the adhesive film by heating.

  • Polyurethane adhesive is made from urethane rubber mixed with an isocyanine hardener. Such glue is suitable for gluing the leather base of the shoe to the sole of leather, rubber, thermoplastic / TEP and polyvinyl chloride / PVC.

Best shoe glue:

  1. Shoe glue Desmokoll / Desmokoll.
  2. Uranus.
  3. Polyurethane adhesive UR-600.
  4. "Professional" glue.
  5. Glue for shoes BONIKOL PUR, BOCHEM.
  6. Glue polyurethane shoe SAR 306, Kenda Farben - a professional Italian composition for leather goods and shoes, withstands high loads and copes well with bonding natural and artificial leather, fabric, rubber and plastics.

For gluing the soles, proper surface preparation is required, as well as glue exposure to the moment of gluing.

How to glue the sole to the boot - instructions

For high-quality bonding of the sole with shoes, it is necessary to observe the technology of applying the adhesive composition.

When choosing a polyurethane or nairite composition, you can rely on this instruction, since both types of glue are applied using a similar technology.

  • Cleaning and degreasing the glued place - ordinary acetone is suitable.
  • For high-quality adhesion, the sole and the glued part of the shoe made of leather or a sneaker should be slightly sanded. Fabric and cardboard parts are not sanding.
  1. We apply a thin layer of glue on both glued surfaces of the boot, without sticking, we withstand time in accordance with the manufacturer's instructions (time may vary) - an average of 5-15 minutes.
  2. After drying the first layer of glue, apply the second and again wait for the formation of the adhesive film, the composition should not be fluid - about 10-15 minutes.

VIDEO INSTRUCTION

In order for the glue to glue the shoe sole qualitatively, it is necessary to create a thermal activation of the adhesive film, at home this can be done using a household or building hair dryer.

It is important that the heating temperature should correspond to the exposure time of warm air:

  1. 80-100 ° C for 30-90 seconds,
  2. 120-140 ° С 20-40 sec.
  • After heating, the sole is firmly pressed with high pressure to the shoe for 20 seconds. Further, the shoes must be left glued for a period of 24 to 48 hours.